GFL 2002 waterdestillatie capaciteit 2 liter per uur
Specifications and features
- Water Still for single distillation (fully automatic) with storage tank, suitable for both bench and wall mounting.
- Very good distillate quality; conductivity approx. 2.3 µs / cm at 25 °C (see "Technical Details").
- The distillate storage tank accepts twice the hourly capacity of the still.
- Electronic level switch switches the still off when the storage tank is full and restarts it automatically when distillate is withdrawn.
- Electronic impurity detector switches the unit off in case of high degree impurities of the water in the evaporator, the red pilot lamp "Clean" will glow.
- Thermostatic low water cut-off.
- Economical energy consumption by distillation of the heated cooling water.
- Water saving through automatic water cut-off. Unnecessary water consumption will be avoided.
- Evaporator easily accessible for cleaning purposes.
- Condenser (cooling coil) inside the storage tank, easily exchangeable.
- Distillate withdrawal through drain cock with continuous and touch position.
- CO2 degassing through outlet in the condenser.
- Heating element, evaporator, storage tank and condenser made of stainless steel.
- Double-walled housing. Outer housing made of electrolytically galvanised sheet steel, electrostatically powder-coated with epoxy resin.
- Water supply through a built-in solenoid valve with connection for pressure hose 1/2" (inner ø approx. 12.7 mm).
- Cooling water outlet with hose connection 3/4" (ø approx. 19.0 mm).
- Hoses for water in- and outlet are available as accessory.
Applications
GFL Water Stills are used in research and development e. g. for preparing bacteriological and medical samples, for cell and tissue cultures as well as for the production of reagents and unguents. Moreover, distillate is used for cleaning and sterilisation processes, for buffered solutions as well as microbiological and analytical applications.
Technical data
Capacity
|
2 l / h
|
Conductivity
|
approx. 2.3 µs / cm at 25 °C *
|
Distillation type
|
single
|
Material
|
stainless steel
|
Operation
|
fully automatic
|
Storage tank capacity
|
4 l
|
Additional features
|
|
Cooling water required
|
approx. 30 l / h
|
Minimum water pressure
|
3 bar to max. 7 bar
|
Exterior dimensions (W x D x H)
|
540 x 290 x 420 mm
|
Electrical connection
|
230 V / 50...60 Hz / 1.5 kW**
|
Net weight
|
approx. 15.4 kgs
|
Gross weight (cardboard box)
|
approx. 18.5 kgs
|
Gross weight (wooden case)
|
approx. 30. kgs
|
Packing volume
|
approx. 0.16 m3
|
* Value averaged by Institut Fresenius for operation with tap water. The distillate quality depends on the quality of raw water.
** other voltages on request
Voor sommige producten uit deze shop kunt u zelf online een offerte aanvragen.
De prijzen van een aantal producten zijn afgeschermd, omdat voor de juiste keuze extra advies nodig is.
Via onderstaand formulier kunt u een afspraak met een productspecialist of een concrete offerte aanvragen.
Graag voor volledigheid van de offerte ook de juiste toebehoren opgeven (indien nodig & bekend).
Vragen? Wij helpen u graag verder 0320-266171.
Vraag hieronder uw offerte aan