Memmert IF30 broedstoof met ventilator 32 liter
Art.Nr.
L1326IF30

Memmert IF30 broedstoof met ventilator 32 liter

Art.Nr.
L1326IF30
Inhoud 32 liter
Met ventilator
Single display met touchscreen
Afmeting intern (lxbxh): 400 x 250 x 320 mm
Temperatuurbereik KT+5 tot +80°C RVS
Behuizing en interieur
Makkelijk schoon te maken
Overtemperatuur alarm
Inclusief 1 draadrooster (max. 3 mogelijk)
Gewicht circa 48 kg 
Bekijk alle specificaties
excl. BTW  1.501,-
1 640,-
(Alle prijzen zijn exclusief BTW)
-
+
Opvolger van...
Specificaties
Specificaties
Merk Memmert
SafeSens pH monitoring Nee
Stapelbaar Ja
Timelapse functionaliteit Nee
Licht Nee
Volume 32 liter
Min. Temperatuur 30
Max. Temperatuur 80
Productbeschrijving

Memmert IF30 broedstoof & incubator Generation 2012

Memmert Generation 2012 IN/IF en INplus/IFplus broedstoven & incubatoren

  • Nieuwe bediening Single en Twin display en software Atmo Control (zie ook video onderaan deze site)
  • De plus modellen zijn voorzien van het Twin display en bieden de mogelijkheid voor uitgebreide programmering en registratie
  • Nieuwe deurklinken zijn makkelijk te openen ook met 1 hand, elleboog of knie

Ventilation & Control

  • orced air circulation by quiet air turbine, adjustable in 10 % steps
  • adjustment of pre-heated fresh air admixture by air flap control in 10 % steps
  • vent connection with restrictor flap
  • adaptive multifunctional digital PID-microprocessor controller with high-definition TFT-colour display
  • self-diagnostics for fault analysis
  • 1 Pt100 sensor DIN class A in 4-wire-circuit
  • Digital backwards counter with target time setting, adjustable from 1 minute to 99 days
  • parameters adjustable on ControlCOCKPIT: temperature (Celsius or Fahrenheit), fan speed, air flap position, programme time, time zones, summertime/wintertime
  • SetpointWAIT function - the process time does not start until the set temperature is reached
  • AtmoCONTROL software for reading out, managing and organising the data logger via Ethernet interface (temporary trial version can be downloaded). USB stick with AtmoCONTROL software available as accessory (on demand).
  • Setting of languages on ControlCOCKPIT: German/English/Spanish/French
  • resolution of display for setpoint and actual temperature values 0.1°C
  • calibration facility directly at ControlCOCKPIT for three freely selectable temperature values
  • programme stored in case of power failure
  • incl. works calibration certificate for +37°C

Overtemperatur protection (double)

  • adjustable electronic overtemperature monitor and mechanical temperature limiter TB, protection class 1 according to DIN 12880 to switch off the heating approx. 20°C above nominal temperature

Textured Stainless Steel casting

  • w x h x d: 585 x 704 x 434 mm
  • fully insulated stainless steel door with
  • 2-point locking (compression door lock)
  • inner glass door
  • rear zinc-plated steel

Interior - heating concept

  • w x h x d: 400 x 320 x 250 mm, 32 l, Depth (less 39 mm for fan)
  • easy-to-clean interior,made of stainless steel,reinforced by deep drawn ribbing with integrated and protected large-area heating on four sides
  • 1 stainless steel grid
  • Max. loading of chamber: 60 kg

Temperature Range

  • min.10°C above ambient up to +80°C

Voltage / Power Rating

  • 230 V (+/- 10 %), 50/60 Hz / approx. 1.600 W
Accessoires
Downloads
Video

Andere bezoekers bekeken ook
Scroll to top